Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.

Toggle Nav
Request a FREE in-home Consultation FREE Samples Design & Buy
Request a FREE in-home Consultation FREE Samples Design & Buy

Choose Your Shade Style

Serena is available in three styles that come in a wide variety of fabrics, colors and finishes.

Honeycomb

Honeycomb with automated raise-lower control , available in two distinct styles and various cell size options.​

Wood Blinds

2” Slat Wood Blinds with automated slat tilt adjustment and cordless manual lift.

Roller

Roller with automated raise-lower control, pictured with fabric wrapped fascia.

Choose your Honeycomb Style

Architectural Honeycomb
Architectural honeycomb features an updated headrail and designer 3/4" cell fabrics with automated raise-lower control.

Standard Honeycomb
Standard honeycomb available in single and double cell fabrics with automated raise-lower control.

Choose Valance Layout

Wood Blinds are available in two valance layout options; please select one:

Single Blind
Valance. Available in widths
20" to 72"

Two Under 1
Available in total widths 40” to 96”.
Blinds are equal in width

Measure

How to Measure

Measurement is critical, please review the correct method of measuring your window dimensions. Stack Guide Right Carrot Arrow How to Measure Videos Right Carrot Arrow

Measurement is critical. Please review the correct method of measuring your window dimensions. How to Measure Videos Right Carrot Arrow

Measurement is critical. Please review the correct method of measuring your window dimensions. How to Measure Videos Right Carrot Arrow

inches

Measure total width of area to be covered in 3 places: for inside mount use smallest dimension inside window frame; for outside mount use largest dimension of area to be covered. Call 1.855.573.7362 with questions.

ENTER WIDTH:
INSIDE MOUNT: Measure width inside frame top, middle and bottom: enter smallest dimension.
OUTSIDE MOUNT WITH FASCIA:
Add 1-3/8" to width measured for shade fabric to fully cover window trim.
OUTSIDE MOUNT NO FASCIA: Add 1" to width measured for shade fabric to fully cover window trim.
Call 1.855.573.7362 with questions.

ENTER WIDTH:
INSIDE MOUNT: Measure the width inside the frame at the top and enter this dimension.
OUTSIDE MOUNT:
Measure horizontally at the top of the window across the trim from one edge of the trim to the other and enter this dimension.​
Call 1.855.573.7362 with questions.

less
inches

Measure total height of area to be covered in 3 places: for all mounts enter largest dimension. Please call 1.855.573.7362 with questions.

ENTER HEIGHT:
ALL MOUNTS: Measure total height of area to be covered in 3 places and enter largest dimension.Please call 1.855.573.7362 with questions.

ENTER HEIGHT:
ALL MOUNTS: Measure total height of area to be covered in 3 places and enter largest dimension.Please call 1.855.573.7362 with questions.

less
Top Back Cover

Back cover eliminates light leakage between headrail and window frame and hides brackets from outside view of window. Adds $10-$20 per shade based on width.

Power Options

battery powered
  • Uses Lutron's patented Clear Connect RF Technology
  • Featuring ultra efficient drive technology and industry leading battery performance.
  • Battery powered shades use standard D or AA batteries (not included, determined by size & fabric).
  • Uses Lutron's patented Clear Connect RF Technology
  • Featuring ultra efficient drive technology and industry leading battery performance.
  • Battery powered shades use standard D or AA batteries (not included, determined by size & fabric).
  • Uses Lutron's patented Clear Connect RF Technology
  • Featuring ultra-efficient drive technology and industry leading battery performance.
  • Battery powered Wood Blinds automated features are slat tilt adjustment for full-view, full-privacy, or preferred slat positioning.
  • Battery powered Wood Blinds raise - lower control is manual.
  • Battery powered Wood Blinds use standard D or AA batteries (not included, determined by size).
less
wired
  • Wired shades include a 15' long 12V (low voltage) cord inside the headrail as shown above
  • Uses Lutron's patented Clear Connect RF Technology
  • A low-voltage (12V) adapter, shown below, can be purchased to plug wired shades into a standard (120V) outlet.
    • One adapter is needed per shade.
    • Without the Plug-In Adapter, a licensed electrician is needed to install a Lutron Power Panel. Please call for more information.
  • Wired shades include a 15' long 12V (low voltage) cord inside the headrail as shown above
  • Uses Lutron's patented Clear Connect RF Technology
  • A low-voltage (12V) adapter, shown below, can be purchased to plug wired shades into a standard (120V) outlet.
    • One adapter is needed per shade.
    • Without the Plug-In Adapter, a licensed electrician is needed to install a Lutron Power Panel. Please call for more information.
  • Wired Wood Blinds include a 15' long 12V (low voltage) cord inside the headrail.
  • Uses Lutron's patented Clear Connect RF Technology.
  • Wired Wood Blinds automated features are slat tilt adjustment for full-view, full-privacy, or preferred slat positioning.
  • Wired Wood Blinds raise - lower control is manual.
  • A low-voltage (12V) adapter can be purchased to plug wired shades into a standard (120V) outlet.
    • One adapter is needed per Wood Blind.
    • Without the Plug-In Adapter, a licensed electrician is needed to install a Lutron Power Panel. Please call for more information.
less
cordless manual

HC Serena manual shades are available in all the colors of our motorized shades. Manual shades are cordless, and come with a clear acrylic pull tab that is mounted in the middle of the shade for easy adjustment. On larger shades, the shade might have a pull tab mounted near each end of the shade.

HC Serena manual shades are available in all the colors of our motorized shades. Manual shades are cordless, and come with a clear acrylic pull tab that is mounted in the middle of the shade for easy adjustment. On larger shades, the shade might have a pull tab mounted near each end of the shade.

less
cordless manual

Serena manual Roller shades are available in all the colors of our motorized roller shades with or without a Fabric Wrapped Fascia. Manual shade sizes are limited! Width: min 27 1/8" to max 63". Height: min 24" to max 60"-72" (depends on fabric selected).

Serena manual Roller shades are available in all the colors of our motorized roller shades with or without a Fabric Wrapped Fascia. Manual shade sizes are limited! Width: min 27 1/8" to max 63". Height: min 24" to max 60"-72" (depends on fabric selected).

less
cordless manual
  • Serena manual Wood Blinds are available in the same finishes as our automated Wood Blinds.
  • A tilt wand is provided for angling slats. It is available for the left-hand side of the blind as you face them.
less

Choose Your Headrail & Mount Type

Choose Your Mount Type

Choose Mount & Valance Style

Mounting Type

You can mount your shades either inside the window frame, on the frame, or on the wall above the frame.
You can mount your shades either inside the window frame, on the frame, or on the wall above the frame.
You can mount your Wood Blinds either inside the window frame, on the frame or on the wall above the frame.
Inside Mount

This mount fits inside the window frame.

  • Shade must be able to move freely top to bottom without obstruction by inner window frames
  • Minimum inside mount depth required is 1"
  • Minimum inside mount depth required is 3/4"
  • Minimum inside mount depth required is 1-5/8"
  • Important: We deduct 1/16" (1.5mm) per side to allow room for proper operation.
  • Important: Light Gaps will be 1/4" (19mm) per side to allow for proper operation.
  • Please provide inner width measurement at the top of the window on the next screen.
  • Important: We deduct 1/8" (3mm) per side to allow room for proper operation.
  • Please provide smallest inner width measurement on the next screen.
  • NOTE: outside mount on or above the window frame may avoid interference from window cranks, sash lift ups or locks
    • less

This mount fits inside the window frame.

  • Shade must be able to move freely top to bottom without obstruction by inner window frames
  • Minimum inside mount depth required is 1"
  • Minimum inside mount depth required is 3/4"
  • Minimum inside mount depth required is 1-5/8"
  • Important: We deduct 1/16" (1.5mm) per side to allow room for proper operation.
  • Important: Light Gaps will be 1/4" (19mm) per side to allow for proper operation.
  • Please provide inner width measurement at the top of the window on the next screen.
  • Important: We deduct 1/8" (3mm) per side to allow room for proper operation.
  • Please provide smallest inner width measurement on the next screen.
  • NOTE: outside mount on or above the window frame may avoid interference from window cranks, sash lift ups or locks
    • less

This mount fits inside the window frame.

  • Blinds must be able to move freely top to bottom without obstruction by inner window frames
  • Minimum inside mount depth required is 2 inches
  • Important: We deduct 1/2" to allow room for proper operation(1/4" per side).
  • Important: We deduct 3/4” to allow room for proper operation. (1/4” on left & right, center gap between blinds will be 1/4 inch).
  • NOTE: Consider using outside mount on or above the window frame to avoid interference from window cranks, sash lift ups or locks.
    • less
Outside Mount - On Frame

This mount fits on the window frame extending to the edge of the molding.

  • An outside mounted shade mounts on the frame, completely covering it from edge to edge
  • Make sure the shade can move freely from top to bottom without being obstructed by curtain pull-backs or other decorative features
    • less

This mount fits on the window frame extending to the edge of the molding.

  • An outside mounted shade mounts on the frame, completely covering it from edge to edge
  • Make sure the shade can move freely from top to bottom without being obstructed by curtain pull-backs or other decorative features
    • less

This mount fits on the window frame extending to the edge of the molding.

  • An outside mounted Blind mounts on the frame, completely covering it from edge to edge
  • Make sure the Blind can move freely from top to bottom without being obstructed by curtain pull-backs or other decorative features
  • Center gap between blinds will be 1/4 inch
    • less
Outside Mount - Above Frame

This Shade mounts on wall above the window frame and extends down to the window sill, covering the window frame completely.

  • 1/2" deep spacers are provided for this mount so shade clears frame.
  • If window trim is greater than 1/2", additional shims or spacers are needed.
  • Vertical measurement should span the distance from the top of the shade on wall to the window sill or end point for shade.
  • Vertical measurement should span the distance from the top of the bracket on wall to the window sill or end point for shade.
    • less

This Shade mounts on wall above the window frame and extends down to the window sill, covering the window frame completely.

  • 1/2" deep spacers are provided for this mount so shade clears frame.
  • If window trim is greater than 1/2", additional shims or spacers are needed.
  • Vertical measurement should span the distance from the top of the shade on wall to the window sill or end point for shade.
  • Vertical measurement should span the distance from the top of the bracket on wall to the window sill or end point for shade.
    • less

This Blind mounts on wall above the window frame and extends down to the window sill, covering the window frame completely.

  • 3/8" deep spacers are provided for this mount so Blind clears frame.
  • If window trim is greater than 3/8", additional shims or spacers are needed.
  • Vertical measurement should span the distance from the top of the Blind on wall to the window sill or end point for Blind.
  • Center gap between blinds will be 1/4 inch
    • less

Headrail Options

Architectural Fascia

Architectural Fascia provides a clean contemporary aesthetic for spaces that require a modern finish and is available in four colors: White, Black, Bronze and Silver. Choose finish at fabric color selection step.

less
Fabric Wrapped Fascia

Attractive 3.375" deep Fabric-Wrapped Fascia conceals the battery cartridge and fabric roll. The shade and fascia arrive assembled and snap in to a custom cut bracket that installs easily.

less
No Fascia Standard Roll

Battery cartridge and fabric roll are exposed. The shade snaps into a custom cut bracket that installs easily.

less
No Fascia - Reverse Roll

Battery cartridge and fabric roll are exposed. Fabric rolls forward off the shade 2.625" away from the back of the installation bracket. The shade snaps into a custom cut bracket that installs easily. Reverse roll is not available with Fabric-Wrapped Fascia.

less

Choose Valance Style

The wood valance is painted or stained to match your slat color. Please note that the headrail behind the valance may not be an exact match.
Easton Valance

3-5/8” depth valance conceals headrail for a finished look. Shown in Stone Grey painted finish.

less
Morgan Valance

3-5/8” depth valance conceals headrail for a finished look. Shown in Red Mahogany stained finish

less

Choose Your Fabric Style

Allows Most Light In
Allows Least Light In
sheer

Open weaves preserve the view to the outside and allow sunlight to filter into a room.

less
translucent

Tighter weaves allow the flow of sunlight but reduce views to shapes and shadows, providing increased privacy.

less
blackout

Opaque fabric blocks all light from coming through fabric weaves.

less
Sheer Single Cell
  • Sheer fabrics work well in sun rooms or offices by reducing glare and preserving the outside view.
  • Single 9/16" Cell
  • Softens intense rays
  • Preserves your exterior view
  • Prices starting at $479
    • less
Light Filtering Single Cell
  • Light filtering shades work well in a living room or dining room where some privacy is needed.
  • Transforms harsh daylight into a soft, filtered glow
  • Provides varying levels of privacy from the outside
  • Saves energy with insulating fabric and design
  • Prices starting at $349
    • less
Light Filtering Double Cell
  • Light filtering shades work well in a living room or dining room where some privacy is needed.
  • Transforms harsh daylight into a soft, filtered glow
  • Provides varying levels of privacy from the outside
  • Allows some light to filter into the space
  • Saves even more energy with double-cell insulating design
  • Prices starting at $424
    • less
Room Darkening Single Cell
  • We recommend using room darkening fabrics in bedrooms, nurseries or media rooms.
  • Block light from entering into a space
  • Creates complete privacy from the outside
  • Saves the most energy due to aluminum lining
  • Prices starting at $369
    • less

Choose Your Fabric Collection & Color

Choose Your Wood Finish

Choose Controls & Accessories for Your Home

Remote Control

I want to use Lutron shade remote controls in my home.less

Connected Home

I want to use a smartphone or tablet with the free Lutron app to control shades and lighting inside or outside my home.less

Remote & Connected Home

I want to use both: Lutron shade controls in my home and a smartphone or tablet with the free Lutron app to control shades and lighting inside or outside my home.less

Name and Save

Please name this shade design using a location for installation. We'll mark each package with the Name for easy reference.

Back: control Style Step Save Add to Cart
Fabric Information
Fabric Care

Damp Cloth

Use a clean, white, lint-free cloth, lightly dampened with clean water only. Wring the cloth thoroughly to prevent excess water. Wipe gently with light pressure only. Hard, fast or excessive rubbing can distort the fabric.

Dusting

This is best done using gentle methods which minimize the possibility of damaging or disturbing woven fabrics, lift cords, venetian slats, etc. Soft filament and feather dusters are recommended. Careful wiping with a soft, lint free cloth may also be effective.

Spot Cleaning

Use detergent that is intended for fabrics and does not contain fabric softener additives or harsh chemicals such as bleach, ammonia, etc. Apply diluted detergent by blotting with a clean cloth. Do not rub. Then, use a second clean cloth to apply a clear-water rinse. Allow to dry thoroughly.

Vacuuming

Use a soft brush attachment to temper the strength of suction and help lift unwanted dust and fibers from the surface of fabrics, cornices, and lineals. Rigorous vacuuming can distort the fabric and is not recommended.